PDAF_seik_update.F90 Source File


Source Code

! Copyright (c) 2004-2024 Lars Nerger
!
! This file is part of PDAF.
!
! PDAF is free software: you can redistribute it and/or modify
! it under the terms of the GNU Lesser General Public License
! as published by the Free Software Foundation, either version
! 3 of the License, or (at your option) any later version.
!
! PDAF is distributed in the hope that it will be useful,
! but WITHOUT ANY WARRANTY; without even the implied warranty of
! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
! GNU Lesser General Public License for more details.
!
! You should have received a copy of the GNU Lesser General Public
! License along with PDAF.  If not, see <http://www.gnu.org/licenses/>.
!
!$Id$
!BOP
!
! !ROUTINE: PDAF_seik_update --- Control analysis update of the SEIK filter
!
! !INTERFACE:
SUBROUTINE  PDAF_seik_update(step, dim_p, dim_obs_p, dim_ens, rank, &
     state_p, Uinv, ens_p, state_inc_p, &
     U_init_dim_obs, U_obs_op, U_init_obs, U_prodRinvA, U_init_obsvar, &
     U_prepoststep, screen, subtype, incremental, type_forget, &
     type_sqrt, flag)

! !DESCRIPTION:
! Routine to control the analysis update of the SEIK filter.
! 
! The analysis is performed by calling PDAF\_seik\_analysis
! and the resampling is performed in PDAF\_seik\_resample.
! In addition, the routine U\_prepoststep is called prior
! to the analysis and after the resampling to allow the user
! to access the ensemble information.
!
! Variant for SEIK with domain decompostion.
!
! !  This is a core routine of PDAF and
!    should not be changed by the user   !
!
! !REVISION HISTORY:
! 2003-07 - Lars Nerger - Initial code
! Later revisions - see svn log
!
! !USES:
  USE PDAF_timer, &
       ONLY: PDAF_timeit, PDAF_time_temp
  USE PDAF_mod_filtermpi, &
       ONLY: mype, dim_ens_l
  USE PDAF_mod_filter, &
       ONLY: forget, observe_ens, type_trans, debug

  IMPLICIT NONE

! !ARGUMENTS:
  INTEGER, INTENT(in) :: step        ! Current time step
  INTEGER, INTENT(in) :: dim_p       ! PE-local dimension of model state
  INTEGER, INTENT(out) :: dim_obs_p  ! PE-local dimension of observation vector
  INTEGER, INTENT(in) :: dim_ens     ! Size of ensemble
  INTEGER, INTENT(in) :: rank        ! Rank of initial covariance matrix
  REAL, INTENT(inout) :: state_p(dim_p)        ! PE-local model state
  REAL, INTENT(inout) :: Uinv(rank, rank)      ! Inverse of matrix U
  REAL, INTENT(inout) :: ens_p(dim_p, dim_ens) ! PE-local ensemble matrix
  REAL, INTENT(inout) :: state_inc_p(dim_p)    ! PE-local state analysis increment
  INTEGER, INTENT(in) :: screen      ! Verbosity flag
  INTEGER, INTENT(in) :: subtype     ! Filter subtype
  INTEGER, INTENT(in) :: incremental ! Control incremental updating
  INTEGER, INTENT(in) :: type_forget ! Type of forgetting factor
  INTEGER, INTENT(in) :: type_sqrt   ! Type of square-root of U
  INTEGER, INTENT(inout) :: flag     ! Status flag

! ! External subroutines 
! ! (PDAF-internal names, real names are defined in the call to PDAF)
  EXTERNAL :: U_init_dim_obs, & ! Initialize dimension of observation vector
       U_obs_op, &              ! Observation operator
       U_init_obs, &            ! Initialize observation vector
       U_init_obsvar, &         ! Initialize mean observation error variance
       U_prepoststep, &         ! User supplied pre/poststep routine
       U_prodRinvA              ! Provide product R^-1 A for SEIK analysis

! !CALLING SEQUENCE:
! Called by: PDAF_put_state_seik
! Calls: U_prepoststep
! Calls: PDAF_seik_analysis_newT
! Calls: PDAF_seik_analysis
! Calls: PDAF_seik_resample_newT
! Calls: PDAF_seik_resample
! Calls: PDAF_timeit
! Calls: PDAF_time_temp
!EOP

! *** local variables ***
  INTEGER :: i, j      ! Counters
  INTEGER :: minusStep ! Time step counter


! ***********************************************************
! *** For fixed error space basis compute ensemble states ***
! ***********************************************************

  IF (debug>0) &
       WRITE (*,*) '++ PDAF-debug: ', debug, 'PDAF_seik_update -- START'

  CALL PDAF_timeit(51, 'new')

  fixed_basis: IF (subtype == 2 .OR. subtype == 3) THEN
     ! *** Add mean/central state to ensemble members ***
     DO j = 1, dim_ens
        DO i = 1, dim_p
           ens_p(i, j) = ens_p(i, j) + state_p(i)
        END DO
     END DO
  END IF fixed_basis

  IF (debug>0) THEN
     DO i = 1, dim_ens
        WRITE (*,*) '++ PDAF-debug PDAF_seik_update:', debug, 'ensemble member', i, &
             ' forecast values (1:min(dim_p,6)):', ens_p(1:min(dim_p,6),i)
     END DO
  END IF
  CALL PDAF_timeit(51, 'old')


! **********************
! ***  Update phase  ***
! **********************

! *** Prestep for forecast ensemble ***
  CALL PDAF_timeit(5, 'new')
  minusStep = -step  ! Indicate forecast by negative time step number
  IF (mype == 0 .AND. screen > 0) THEN
     WRITE (*, '(a, 5x, a, i7)') 'PDAF', 'Call pre-post routine after forecast; step ', step
  ENDIF
  CALL U_prepoststep(minusStep, dim_p, dim_ens, dim_ens_l, dim_obs_p, &
       state_p, Uinv, ens_p, flag)
  CALL PDAF_timeit(5, 'old')

  IF (mype == 0 .AND. screen > 0) THEN
     IF (screen > 1) THEN
        WRITE (*, '(a, 5x, a, F10.3, 1x, a)') &
             'PDAF', '--- duration of prestep:', PDAF_time_temp(5), 's'
     END IF
     WRITE (*, '(a, 55a)') 'PDAF Analysis ', ('-', i = 1, 55)
  END IF

#ifndef PDAF_NO_UPDATE
  IF (debug>0) THEN
     WRITE (*,*) '++ PDAF-debug PDAF_seik_update', debug, &
          'Configuration: param_int(3) -not used-  '
     WRITE (*,*) '++ PDAF-debug PDAF_seik_update', debug, &
          'Configuration: param_int(4) incremental ', incremental
     WRITE (*,*) '++ PDAF-debug PDAF_seik_update', debug, &
          'Configuration: param_int(5) type_forget ', type_forget
     WRITE (*,*) '++ PDAF-debug PDAF_seik_update', debug, &
          'Configuration: param_int(6) type_trans  ', type_trans
     WRITE (*,*) '++ PDAF-debug PDAF_seik_update', debug, &
          'Configuration: param_int(7) type_sqrt   ', type_sqrt
     WRITE (*,*) '++ PDAF-debug PDAF_seik_update', debug, &
          'Configuration: param_int(8) observe_ens           ', observe_ens

     WRITE (*,*) '++ PDAF-debug PDAF_seik_update', debug, &
          'Configuration: param_real(1) forget     ', forget
  END IF

  CALL PDAF_timeit(3, 'new')

  IF (subtype == 0 .OR. subtype == 2 .OR. subtype == 3) THEN
! *** SEIK analysis with forgetting factor better implementation for T ***
     CALL PDAF_seik_analysis_newT(step, dim_p, dim_obs_p, dim_ens, rank, &
          state_p, Uinv, ens_p, state_inc_p, forget, &
          U_init_dim_obs, U_obs_op, U_init_obs, U_init_obsvar, U_prodRinvA, &
          screen, incremental, type_forget, flag)
  ELSE IF (subtype == 1) THEN
! *** SEIK analysis with forgetting factor ***
     CALL PDAF_seik_analysis(step, dim_p, dim_obs_p, dim_ens, rank, &
          state_p, Uinv, ens_p, state_inc_p, forget, &
          U_init_dim_obs, U_obs_op, U_init_obs, U_init_obsvar, U_prodRinvA, &
          screen, incremental, type_forget, flag)
  ELSE IF (subtype == 4) THEN
! *** SEIK analysis with ensemble transformation ***
     CALL PDAF_seik_analysis_trans(step, dim_p, dim_obs_p, dim_ens, rank, &
          state_p, Uinv, ens_p, state_inc_p, forget, &
          U_init_dim_obs, U_obs_op, U_init_obs, U_init_obsvar, U_prodRinvA, &
          screen, incremental, type_forget, type_sqrt, flag)
  END IF

  CALL PDAF_timeit(3, 'old')

  IF (mype == 0 .AND. screen > 1) THEN
     WRITE (*, '(a, 5x, a, F10.3, 1x, a)') &
          'PDAF', '--- update duration:', PDAF_time_temp(3), 's'
  END IF

! *** Resample the state ensemble
  CALL PDAF_timeit(51, 'new')
  CALL PDAF_timeit(4, 'new')

  IF (subtype == 0 .OR. subtype == 2 .OR. subtype == 3) THEN
     CALL PDAF_seik_resample_newT(subtype, dim_p, dim_ens, rank, &
          Uinv, state_p, ens_p, type_sqrt, screen, flag)
  ELSE IF (subtype == 1) THEN
     CALL PDAF_seik_resample(subtype, dim_p, dim_ens, rank, &
          Uinv, state_p, ens_p, type_sqrt, screen, flag)
  END IF

  IF (debug>0) THEN
     DO i = 1, dim_ens
        WRITE (*,*) '++ PDAF-debug PDAF_seik_update:', debug, 'ensemble member', i, &
             ' analysis values (1:min(dim_p,6)):', ens_p(1:min(dim_p,6),i)
     END DO
  END IF

  CALL PDAF_timeit(4, 'old')
  CALL PDAF_timeit(51, 'old')
  IF (mype == 0 .AND. screen > 1) THEN
     WRITE (*, '(a, 5x, a, F10.3, 1x, a)') &
          'PDAF', '--- resample duration:', PDAF_time_temp(4), 's'
  END IF
#else
  WRITE (*,'(/5x,a/)') &
       '!!! PDAF WARNING: ANALYSIS STEP IS DEACTIVATED BY PDAF_NO_UPDATE !!!'
#endif

! *** Poststep for analysis ensemble ***
  CALL PDAF_timeit(5, 'new')
  IF (mype == 0 .AND. screen > 0) THEN
     WRITE (*, '(a, 5x, a)') 'PDAF', 'Call pre-post routine after analysis step'
  ENDIF
  CALL U_prepoststep(step, dim_p, dim_ens, dim_ens_l, dim_obs_p, &
       state_p, Uinv, ens_p, flag)
  CALL PDAF_timeit(5, 'old')
  
  IF (mype == 0 .AND. screen > 0) THEN
     IF (screen > 1) THEN
        WRITE (*, '(a, 5x, a, F10.3, 1x, a)') &
             'PDAF', '--- duration of poststep:', PDAF_time_temp(5), 's'
     END IF
     WRITE (*, '(a, 55a)') 'PDAF Forecast ', ('-', i = 1, 55)
  END IF

  IF (debug>0) &
       WRITE (*,*) '++ PDAF-debug: ', debug, 'PDAF_seik_update -- END'

END SUBROUTINE PDAF_seik_update